PTFE Extruded Tube
-
Payment
-
Origin
China Mainland
-
Minimum Order
15
-
Packing
Pieces
- Contact Now Start Order
- Description
Product Detail
PTFE Tubes
We are the leading supplier of the ptfe tubes. The all manufacturing process is design in such a way that minimizes the cost of the production. Our ptfe tubing is appreciated and favored by the customers for their performance.
It consists of all characteristics of ptfe, which is an ideal raw material among all plastics. It has internally smooth structure, which made it so strong and flexible. It consists anti friction, anti-brokage and anti-blockage characteristic. It's highly resistant to the corrosive chemicals. It also consists of good dielectric strength and good tensile strength.
Advantages
• Smooth inner surface
• Abrasion resistance
• High temperature resistant
• High dielectric strength
• High strength against pressure
• anti-friction
• anti-corrosive
• Flexible.
• Non-contaminating
PTFE Tubing & SLEEVES | ||
Standard Size: 3mm to 28mm wall thickness: 0.75mm to 2mm Grade: VIRGIN Tem. Range: -200 Deg.C to + 250 Deg.C., good dielectric insulation properties. Tensile Strength: between 2,500-4,000 Density: 2.13-2.24 | ||
Data Sheet
Property | ASTM test | Value | |
---|---|---|---|
Physical properties | Specific gravity | D792 | 2.15 |
Water absorption ( % ) | D570 / 24 hrs 1/3" t | < 0.00 | |
Mold shrinkage ( cm / cm ) | 0.02 - 0.05 | ||
Contact angle ( degree ) | Angle to level | 110 | |
Thermal properties |
Thermal conductivity (cal/sec/cm2, o /cm ) | C177 | 6 x 10 - 4 |
Coefficient of liner thermal expansion(1/oC) | D696 / 23 - 60oC | 10 x 10 - 5 | |
Melting point (oC ) | 327 | ||
Melt viscosity ( poise ) | 1011 - 1013 | ||
(340 -380oC) | |||
Maximum temperature for continuous use (oC / oF ) | 260 / 500 | ||
Mechanical properties | Tensile strength ( kgf / cm2 ) | D638 / 23oC | 140 - 350 |
Elongation ( % ) | D638 / 23oC | 200 - 400 | |
Compression strength ( kgf / cm2) | D695 / 1 % deformation, 25oC | 50 - 60 | |
Tensile modulus ( kgf / cm2 ) | D638 / 23oC | 4,000 | |
Flexural modulus ( kgf / cm2 ) | D790 / 23oC | 5,000 - 6,000 | |
Impact strength ( ft - lb / in ) | D256 / 23oC, Izod | 3 | |
Hardness (Shore) | Durometer | D50 - D65 | |
Deformation under load ( % ) | D621 / 100oC, 70 kgf / cm2, 24 hrs | 5 | |
D621 / 25oC, 140 kgf / cm2, 24 hrs | 7 | ||
Static friction coefficient | Coated - steel surface | 0.02 | |
Electrical properties | Dielectric constant | D150 / 103Hz | 2.1 |
D150 / 106 Hz | 2.1 | ||
Dielectric dissipation factor | D150 / 103 Hz | < 1 x 10 - 5 | |
Dielectric break down strength ( V / mil ) | D149 / Short time,1/ 8 in | 480 | |
Volume resistivity( ohm - cm ) | D257 | > 1018 | |
Chemical resistance | Excellent | ||
Weather ability | Excellent | ||
Combustibility ( % ) | D2863 / Oxygen concentration index | > 95 |
- Moulded PTFE Teflon Tubes 15 Pieces / (Min. Order)
- Flexible PTFE Tube 15 Pieces / (Min. Order)
- PTFE Balls 15 Pieces / (Min. Order)
- Moulded PTFE Teflon Tubes 15 Pieces / (Min. Order)
- PTFE Filament Packing 15 Pieces / (Min. Order)
- Pure PTFE Packing With Oil 15 Pieces / (Min. Order)
- Pure PTFE Gasket 15 Pieces / (Min. Order)
- PTFE O Rings 15 Pieces / (Min. Order)
- PTFE Envelope Gasket 15 Pieces / (Min. Order)
- Expanded PTFE Gasket 15 Pieces / (Min. Order)
- Pure PTFE Packing Without Oil 15 Pieces / (Min. Order)
- PTFE Thread Seal Tape 15 Pieces / (Min. Order)
- Flexible PTFE Tube 15 Pieces / (Min. Order)
- Molded PTFE Rod 15 Pieces / (Min. Order)
- PTFE Extruded Rod 15 Pieces / (Min. Order)
- Etched PTFE Sheet 15 Pieces / (Min. Order)
- Filled PTFE Sheet 15 Pieces / (Min. Order)
- Molded PTFE Sheet 15 Pieces / (Min. Order)
- Skived PTFE Sheet 15 Pieces / (Min. Order)
- Expanded PTFE Joint Sealant Tapes 15 Pieces / (Min. Order)
- Expanded PTFE Sheet 15 Pieces / (Min. Order)